In previous generations of the FP3 application and support, customers would have to contact customer service to have their map manually modified for aftermarket camshafts. We have now made it even easier to make adjustments for cams. FP3 has now incorporated more than 50 different aftermarket cams in the View/Edit maps area. All customers have to do is select the desired camshaft, and flash the change into the ECM. This will now synchronize the T/MAP sensor for proper operation with the aftermarket cam. It is recommended that after this change is applied, to run an AutoTune Session to further improve the map.
The FP3 can already read and clear troublecodes. Now it takes it one step further. On top of reading and clearing the troublecodes, it will also give you a specific description of that troublecode to better help diagnose the potential cause(s).
This feature allows a user to end an AutoTune session without applying and reverting back to the map flashed in before AutoTune was initiated.
The FAQ's are now more accessible within the FP3 Application. If customers have a question or issue, the can easily access the Frequently Asked Questions under customer support as well as in the system status menu. Descriptions have also been added for easier navigation.
The FP3 now offers a button within the customer support area that will force check for any firmware updates. The FP3 still automatically checks for updated firmware each time the FP3 is connected to device. A good internet connection is required for this process.